For more than 40 years, Terry Giles has crisscrossed the U.S. and the world not only working to install better coating systems for major OEMs for Henkel, but also educating others in the industry through talks and presentations.
John Heyer will be the first to admit that he took a job in the coatings industry simply because he needed a job back in the early 1970s.
The Powder Coating Institute is hosting “Powder Coating 101 - Powder Coating Done Right: Basics Workshop” July 19-20 in Minneapolis.
The Powder Coating Institute awarded its 2022 scholarships to deserving students who are studying subjects that can lead to a career in powder coating.
Velinda Colin is a lead masker at TWF Industries, a family-owned powder coating operation in Alexandria, Minnesota.
Altoz broke ground on a 75,000 square foot expansion of their facility in Red Lake Falls, MN., that will include new powder coating operations.
Carlisle Fluid Technologies is pleased to be hosting the PCI 202 class, Powder Coating Done Right, at their Toledo, Ohio, Demontrsation Lab and Training Center on May 3-4.
Metallics are powder coatings that have a metallic or sparkle effect added to them.
Allison Lee’s initial goal as an owner of a powder coating facility was to get through the first five years of operation.
The Chemical Coaters Association International and Powder Coating Institute’s Annual Meeting registration is now open.
“What’s better: spray or dip?” I get asked this question a lot regarding thermoplastic powder coatings.
If you are finding that your staff is spending a lot of time manually handling parts and suspect it is impacting your production rates, there are ways to streamline operations.
The CCAI Finishing Education Foundation (CCAIFEF) is accepting applications for the Matt Heuertz Scholarship Program.
So you have your substrate, all prepped and ready and it is time to lay down some coating.
The Chemical Coaters Association International has opened registration for its Women in Finishing FORUM to be held May 2-4 in Cleveland.
The Chemical Coaters Association International and FABTECH is accepting submissions for presentations at the 2022 show, which will be Nov. 8-10 in Atlanta.
Tim Durkin has a fairly simple approach to quality control when it comes to coating parts as supervisor at Hirschi Powder Coating in Las Vegas, Nevada.
